Відео

Did you find a round space when you installed the new headlight? I bought third market headlight, but it doesn’t seem to stay on? What headlight bezel did you get?

Did you find a round space when you installed the new headlight? I bought third market headlight, but it doesn’t seem to stay on.?

I lOve you damn ashole😂😂😂 you help me i try 12 days to make it until i see your clip damn you are king

What if I got a catch can that’s using both lines for the intake manifold? What do I use for the master cylinder?

Can anyone tell me where I can find swaybar links for a 2 inch lift Silverado, 1500

Do you have link for the mods u added?

Do you think this tube will work for the 4.3 also? Air raid has a 4.3 tube for 2020 but I have a 2015 and not sure if it’ll work

Omg this video amazing, wow thank you so much Brother you’re amazing and this video saving my time alot to bleeding it 🙏🙏🙏💯💯💯💯

I tried to reverse bleed my 1997 bandit caliper which has two bleed nipples. I cannot squeeze the syringe. I took the reservoir cap off the back brake and it doesnt work. For reference i rebuilt the rear caliper with new seals and pistons and i also have brand new steel braided lines. Please help. I will also try again and add here if i was successful so if someone reads this who has the same problem, i will say. Nothing worse than someone asking for help and not giving the answer to help others. Have a nice day =)😊

EXTRA TIP (from what i've found doing this) is to gently tap the lever while steering left-right-center to more thoroughly get the air out of your master cylinder. Careful not to spill it though!

Does doing such thing void warranty?

Can this be used in a non gdi engine? 2003 ford taurus

Excellent and to the point, subscribed.

Great video. Appreciate it.

Just tried this and it worked like a charm.

King!

I NEVER would've EVER considered those tiny micro bubbles a factor until seeing this video. My lever went from almost touching the grip to barely compressing an inch. Thanks so much compadre!

I was struggling for DAYS! Took the brake line of a few times, even took my calliper appart to see if i missed something during the rebuilding. I could not find anything wrong. Then i found your video and it worked instantly. Thanks for sharing this ❤

100% worked

🤦‍♂️🤦‍♂️🤦‍♂️🤦‍♂️

hello i have ADD1 3.3 oil catch can using that manifold port. do i tap into this . thnx

I got the Gumout intake foam, it looks like it’s aromatic solvents, acetone, naphthalene, and I am especially curious why it has carbon dioxide in it

Good video for bleeding the front brakes on a bike... explained nice and easy and good quality vids shows it all, well done.

gracias

Should have came here first, Thanks !

Appreciate you bro! Saved me so much time doing other methods

Thank you very much, I was also struggling to find a simple video that would show me a simple fix, and this process worked for me on my 2017 GMC Sierra.. Thank you very much!

I spent riddiculous amount of time trying to stiffen the lever using common method until i saw your vid. Thank you so much for this

180 in duh truck is crazy

Thought I wasn't going to accomplish my goal of riding to work Monday. This SAVED me.

I'm gonna try this with my electric bike. Just to bleed the rear brake line takes over 2 hours.

Thank you,thank you, struggled for 4 days ,trying to get front bled. Went out to the garage ,15,minutes later it was all set to take a ride

Thank you!

You just saved me tons of $$ and frustration, thank you!

Hi. What about rear break? Is the same rule ? I changed caliper, and pumps all day and nothing:(( please advise 🙏

Did you do Wix? I couldn't find it.

Truck sounds good inside. What mufflers did you use? Good video by the way.

Thank you very much this fixed my problem!

that doggo is the marketing manager?😍

You just blessed me bro, this worked first try

ayyyyy you just saved my day!!!!

Thank you so much man! I stripped my front brake system and gave it a clean and could not get pressure when I put it back together. I did the soft pedal pushes and the bubbles came out as you demonstrated. Once I had enough pressure in the pedal, I went ahead and bled the front brake and it is good as new.

Liked how that bag popped out in sync with the song. Girl from Ipanema is a banger and so are your videos

Can you just leave the pump on and just cut the belt. and plug the hose

Bro i love you ❤obviously u helped me alot

How has the finish on the headers held up over the years? Do they still look good?

what about the rear brake!

I might need to do some shit like this to my 93 nighthawk.

Have you gotten any new oil leaks since doing this? Dont see why we can't simply tee into the pcv to manifold line to feed the booster vaccuum & leave the factory crankcase pressure system in place? Anyone have any thoughts on that?

Dude... you are the first video I have found that explains this way. It does work!!! My polaris atv was a little different in the amount of pull. You also need to let it sit for a few in began trying to get out bubbles. I am assuming this is reverse bleeding. My entire system was replaced and I gravity bleed before doing what this video shows, but it worked like a champ! Thanx bud👊